LED panels: The innovative room lighting is so bright and modern

What makes LED panels so different from “normal” ceiling lights?

There would be on the one hand the design aspect: LED panels are flat. You have a tremendous amount thin profile – And without such a compact lighting technology as LED, this would never be possible. The big advantage: The lamp itself takes a back seat, which is very modern and minimalist is. This causes a tidier spatial image, because the Space seems biggerbecause the lamp takes up little space in it. This makes LED panels interesting even for small spaces.

On the other side of the light aspect: With an LED panel illuminates the entire area. evenly and glare, This is significantly different from a point light source, eg. B. a light bulb. LED panels always ensure uniform, bright room lighting.

Where is the difference between built-in and surface-mounted panels?

LED panels are divided into two categories: the built-in and built-up panels. mounting panels are installed in the ceiling. As a result, the architecture (ceiling) and lighting (LED panel) become one. But you can not install built-in panels in every ceiling. However, you do not have to do without the modern lighting method – that’s what you get Building panels, These are attached to a ceiling similar to a ceiling light.

Are there round LED panels?

If a square light source stylistically just does not want to fit into your four walls, you can course to dodge a round shape, Although the term “LED panel” is usually understood to mean the angular, flat mounting or installation variant, many other round recessed luminaires also fulfill a similar function. For these is often the term ” downlight“Used. And here there are recently attractive LED variants.

What sizes of LED panels are there?

LED panels are not standardized, which is why there is a large variety of construction and mounting sizes. However, meanwhile some dimensions as “standard” exposed. These include, for example, inlay panels (for grid ceilings) the sizes 625x625mm / 600x600mm / 1250x625mm / 1250x312mm / 1200x300mm. For round LED panels, diameters of 68mm / 82mm are often used.

What should be considered for panels for bathrooms, kitchens or wet rooms in general?

Depending on the location and intensity with which the light in contact with moisture LED panels (like any other luminaire in this area) must come with a corresponding one protection be equipped. For example, IP44 against the ingress of foreign bodies> = 1mm and with splash water protection.

How are LED panels installed in plasterboard ceilings?

This depends entirely on the product, which always comes with proper assembly instructions. Usually, LED panels are over one Sawn opening in the plasterboard built using the assembly springs on the lamp and / or with additional Mounting Kits, z. B. installation frame.

How are LED panels mounted to the ceiling?

In addition to the installation method in plasterboard ceilings, there is the option of installing or inserting LED panels in grid ceilings. Because these LED panels are easy inserted in the suspended grid ceiling, Compared to the plasterboard installation, the grid ceiling installation offers a optical advantageSince the ceiling system supports the luminaire, the luminaire adapts perfectly to the overall appearance of the ceiling no attachment or frame you can see. For this reason, grid ceilings are often used in company buildings.

mounting panels on the other hand, like other normal mounted luminaires are installed. As a rule, LED panels have one for this purpose Mounting position with mounting brackets, These are drilled to the ceiling and the lamp attached to it. As a result, no suspended ceiling (grid or plasterboard) is necessary.