Landscape Lighting Transformer

Landscape lighting transformer – Disable panorama lighting transformer to cease the transformer from drawing housekeeping when the panorama lights now not work or when eradicating the lights out of your panorama structure. Turning on the panorama lighting the photocell lets you activate the lighting manually. Or additionally set the timer on the preset for preset at occasions. It additionally permits you guide management when the picture cell is now not working correctly. Landscape lighting transformer and picture cells use your panorama light, permitting the light to progress from nightfall to daybreak or generally you select through the use of the built-in timer. Directions to disable panorama lighting transformer & photocells is, beginning by disconnect the transformer from the facility provide.

Disconnect panorama lighting transformer that plug into the wall. Second, place black electrical tape over the “eye” picture digicam to trigger panorama lights to come back on to seek out the circuit that provides energy to a wired landscaping transformer. Change off the switches inside the facility field till the light is now not burning. Place the facility strip over the change in “Off” mode to maintain different individuals in your house from turning it on once more. Third, loosen the pole screws on the backside or again of the panorama lighting transformer that connects the low voltage cables to the transformer. Pull the cables from beneath the transformer connection screws. Fourth, loosen the pole screws on the backside of the rear of the transformer that connects the photocell to the transformer.

Pull the three wires from beneath the pole screws on the transformer to attach the photoelectric cell. Fifth, disconnect the facility to the panorama lighting transformer by connecting the transformer or turning off the change. Unscrew hard-coded photocell from the physique of the transformer. Final, pull the photocell from the physique of the transformer to reveal the wires. Twist the contactors that maintain the 2 wires from the transformer to the 2 wires from the photocell. Twist one of many wire connections again on the 2 cables from the transformer to reconnect the circuit. Push the wires into the transformer and twist a climate plug within the opening.